AMS3346 Silicone Sheet & Uncured Compound
AMS3346 silicone meets an SAE Aerospace Material Specification for a high-strength, high-tear, low-temperature, and engine-oil-resistant phenyl methyl vinyl silicone rubber (PVMQ elastomer) with a Shore A hardness of 60 durometer (typically 55 to 65 range).
AMS3346 specifies a solid silicone material engineered specifically for products used in aircraft piston engine oil and extreme low-temperature environments where maximum tear resistance and physical durability are essential.
At ElastaPro, we manufacture premium-grade AMS 3346 solid silicone sheeting, continuous rolls, and uncured silicone compounds formulated for reliable die-cutting, custom molding, and gasket fabrication.
Key Performance Properties
Hardness: 60 durometer Shore A (55–65 range).
High Tear Strength & Tensile Strength: Formulated for high tear resistance (typically 150 ppi Die B) and high tensile strength (minimum 1,000 psi) to handle mechanical stress without tearing.
Extreme Low Temperature & Engine Oil Resistance: PVMQ formulation maintains flexibility down to extreme sub-zero temperatures (down to -130°F / -90°C) while exhibiting resistance to aircraft piston engine oils.
Compression Set Resistance: Specially compounded to maintain long-term sealing force and elastic recovery under continuous mechanical loads.
Chemical & Environmental Resistance: Exceptional resistance to ozone, UV light, weathering, and environmental aging.
Material: Solid phenyl methyl vinyl silicone rubber (PVMQ elastomer).
Forms: Supplied in cured sheets, rolls, strips, uncured silicone compounds, and custom extrusions or molded profiles.
Material Form Factors
ElastaPro supplies AMS 3346 material across flexible manufacturing formats to streamline your production:
AMS 3346 Cured Silicone Sheeting & Rolls
- Gauges: Available in standard thickness options from 0.010″ to 0.500″
- Widths: 36″, 48″, and 60″ continuous rolls, or custom slit widths
- Color Options: Red/Orange, Gray, Black, and Translucent (custom color matching available)
AMS 3346 Uncured Silicone Compound
- Supplied in slabs, continuous strips, or calendared uncured rolls
- Formulated for compression molding, transfer molding, or custom vulcanization workflows
- Engineered with precise shelf-life and storage temperature parameters
Primary Applications for AMS3346 Silicone
- Aerospace & Defense: Engine compartment seals, airframe gaskets, environmental sealing, and vibration damping mounts.
- Electronics & Enclosures: Weather-tight cabinet gaskets exposed to extreme temperature swings and harsh outdoor elements.
- Industrial & Transportation: High-durability diaphragms, fluid transfer seals, and thermal insulation pads.
Frequently Asked Questions (FAQ)
What is the difference between AMS 3346 cured sheet and uncured compound?
Cured AMS 3346 silicone sheet is fully vulcanized during manufacturing and ready for immediate die-cutting, waterjet cutting, or slitting into gaskets. Uncured AMS 3346 compound is un-vulcanized, allowing fabricators and molders to press, form, and cure the material into complex three-dimensional custom parts using custom tooling.
Is AMS 3346 suitable for high-tear applications?
Yes. AMS 3346 explicitly requires high tensile and tear properties compared to general-purpose silicone grades, making it ideal for dynamic seals subject to flexing, movement, or mechanical stress.
Does ElastaPro supply pressure-sensitive adhesive (PSA) backing on AMS 3346 sheets?
Yes. We supply cured AMS 3346 roll stock with acrylic or silicone pressure-sensitive adhesives applied to one or both sides to simplify gasket placement during assembly.
Ready to Discuss Your Silicone Requirements?
Eliminate the risks of import delays and volatile shipping times by partnering with a trusted domestic manufacturer.
Request a Quote (RFQ)